Products

This harness has correct ends to plug in original dash harness and steering column. No wires to splice.

This harness has correct ends to plug in original dash harness and steering column. No wires to splice.

3 7/8" and 4 1/4" connector kit allows the dash harness connection to any 1969 or newer GM steering column. Comes complete with plastic plug bodies and necessary terminals.

These dress up kits will fit 1969 or newer GM columns. Has flattened style signal lever with single screw attachment.

Plastic indicator lens with pointer to mount on column. Simple way to provide shift indicator on aftermarket automatic column. Select transmission type below.

These are "Retrofit" tilt columns made for 1955-57 Chevrolet's. This is an 8 position tilt automatic transmission column. Columns use a 3/4" 36-spline shaft and comes completely wired with self-cancelling turn signals,4-way flashers, horn wiring and includes an aluminum dress-up lever kit. Automatic columns also have a built in neutral switch and can be used with your stock dash indicator. These columns are designed to use with 1969 or later GM wheels or most aftermarket custom wheels. To use a stock steering wheel an adapter Part # IDT-0001B must be ordered. Please select from options below to order correct column for your car. Also listed below are the necessary parts you can choose to complete your installation. These columns with the correct coupler can be used with a stock steering box or a modern GM power steering box. Contact us for columns using rack and pinion steering. On 1957 models a tilt column will move the steering wheel 2" closer to the driver, to alleviate this issue use a straight column or a "Shorty 9 bolt" steering wheel adapter will be necessary. Please call us with technical questions or if you're not sure what to order.

NOTE: AUTOMATIC COLUMN SHIFT TRANSMISSION

MADE IN USA

Due to the size of this item shipping charges may be adjusted to some areas.

These are "Retrofit" tilt columns made for 1955-57 Chevrolets. This is a floor shift style 8 position tilt column. Columns use a 1"DD shaft and comes completely wired with self-cancelling turn signals,4-way flashers, horn wiring and includes an aluminum dress-up lever kit. These columns are designed to use with 1969 or later GM wheels or most aftermarket custom wheels. To use a stock steering wheel you must order an adapter Part # IDT-0001B. Please select from options below to order correct column for your car. Also listed below are the necessary parts you can choose to complete your installation. These columns with the correct coupler can be used with a stock steering box or a modern GM power steering box. Contact us for columns using rack and pinion steering. On 1957 models a tilt column will move the steering wheel 2" closer to the driver, to alleviate this issue a "Shorty 9 bolt" steering wheel adapter will be necessary. Please call us with technical questions or if you're not sure what to order.

NOTE:FLOOR SHIFT COLUMN

Due to the size of this item shipping charges may be adjusted to some areas.

MADE IN USA

These are "Retrofit" steering columns for 1955-57 Chevrolets. These are column shift non-tilt columns. These are perfect if you just want to upgrade your old original column. Columns use a 3/4" 36-spline shaft and comes completely wired with self-cancelling turn signals,4-way flashers, horn wiring and includes an aluminum dress-up lever kit. These columns are designed to use with 1969 or later GM wheels or most aftermarket custom wheels. To use a stock steering wheel an adapter Part # IDT-0001B must be ordered. Please select from options below to order correct column for your car. Also listed below are the necessary parts you can choose to complete your installation. These columns with the correct coupler can be used with a stock steering box or a modern GM power steering box.

MADE IN USA

Due to the size of this item shipping charges may be adjusted to some areas.

Harness necessary to adapt an Ididit or later model steering column in a 1967-68 Chevelle. This harness adapts the steering column signal harness to the original dash harness.

Harness necessary to adapt an Ididit or later model steering column in a 1964-66 Chevelle. This harness adapts the steering column signal harness to the original dash harness. 

Retrofit floor shift steering columns for a 1964-65 Chevelle or El Camino. These do not require modifications to your original car to install. Uses your original dash and floor mount. Column comes standard with 8-position tilt, self-canceling turn signals, 4-way flashers, knobs & levers, 3 7/8" wiring plug, and a 3/4" 36 lower shaft. A steering shaft installation kit will be required. These are listed as separate items in this section. These columns use a 1969 and later signal housing, aftermarket wheels will fit. To use your original steering wheel and adapter can be purchased. Columns are available in paintable steel, chrome, black power coated, brushed or polished aluminum. Column styles and pricing listed below.

Kit to install your Ididit steering column into a 1964-66 Chevelle. This kit fits all 1964-65 Chevelle's and a 1966 with a column shift. Kit includes a new coupler, steering shaft and rag joint. In models using an original dash harness you'll get a 4-way flasher harness. Models using an aftermarket wiring harness don't need that. To get the correct installation kit you'll need to know the steering shaft diameter and spline count. Kit prices and options are listed below. 

Lokar column linkage cable kit for GM aftermarket 2" steering columns. Opened package, never installed. Part # ACA-1804.

NEW Universal Corvette style disc/drum dual master. Has 1" bore. Can be used for both manual or power brakes. Can be plumbed on either left or right side. Accepts 9/16" & 1/2" fittings. 

Top mount spark plug wire loom kit for Chevrolet engines with center bolt valve covers.
7-8mm wire.

Allows the separators to be positioned vertically instead of horizontally. Contains 6 brackets, and two, 2-line, 3-line, and four 4-line separators.
7-8mm wire

Lays the wires out parallel to the valve cover. Contains 6 brackets and two 2-line, 3-line, and four 4-line separators.
7-8mm wire

These are correct for a Belair or Biscayne but will also fit Impala. The difference is a small chrome trim ring in the center of the lens. These lenses were made by Glo-Brite, a replacement lens company in the Sixties and early Seventies. Sold as a pair. 

NOTE: VERY LIMITED QUANITIES ON THIS ITEM

This is correct for Belair or Biscayne models but will fit Impala just missing the chrome trim ring in the center. These lenses were made by Glo-Brite, a replacement lens company in the Sixties and early Seventies. 

NOTE: VERY LIMITED QUANITIES ON THIS ITEM

These lenses were made by Glo-Brite, a replacement lens company in the Sixties and early Seventies.

NOTE: VERY LIMITED QUANITIES ON THIS ITEM

New Old Stock GM rear quarter molding for a 1970-72 El Camino. Gm Part # 8702511. Part has shelf scratches and a small ding. Covers about a 2 inch area of the molding. Comes with original clip package. This fits left or right side. Giving an honest description, this would be for a driver quality car.

These are what we believe to be NOS GM right side roof pillar moldings for a 1970-81 Camaro. These were bought in a parts lot and were not in any GM packaging. Inside is GM part # 20092656. 

V-8 clutch fork for 1984-92 Camaro and Firebirds. Part # 14075725. Includes pivot ball.